Best PoE Security Camera for a 100-Foot Driveway
At 100 feet, the main problem is not buying more megapixels. It is keeping the driveway evidence zone narrow enough that the subject occupies meaningful pixels.
| Model | Why it fits a long driveway | Best mounting situation |
|---|---|---|
| RLC-843A | 5× optical zoom, 105°–31° horizontal FOV, documented IR up to roughly 100 ft, PoE/local recording | Reachable entrance, gate or lower mounting point where IK10 matters |
| RLC-811A | 5× optical zoom and the same narrow 31° end of the range | Wall/eave position where bullet format is acceptable |
| RLC-833A | 3× optical zoom, 94°–50° FOV | Shorter or wider driveway where 5× is unnecessary |
Do not interpret “100-foot IR” as 100-foot identification
Infrared illumination distance only tells you how far the camera can illuminate a scene under specified conditions. Face or plate identification depends on focal length, target width, angle, motion, shutter speed and actual pixel density. A camera can “see” a vehicle at 100 feet without producing identification-grade detail.
Frame the lane, not the property
If the target zone is a 10–15 foot lane at the far end of the driveway, use optical zoom to frame that lane rather than recording the full yard. Use our Coverage & Focal Length Calculator to estimate scene width and pixels per foot at 100 feet.
For license plates
Plate capture is a separate problem. Keep the target angle controlled, avoid asking one camera to be both a panoramic overview and a plate camera, and review Security Cameras for Driveway License Plates.
Manufacturer reference: RLC-843A specifications.